Epoxy Dispensing System for Placing Dowel Bars and Traffic Markers (AST RMP 624-C)
Used to Dispense
- Epoxies
- Urethanes
- Unfilled Epoxies
- Unfilled Urethanes
Common Applications
- Doweling
- Joint Filling
- Traffic Delineators
AST RMP 624-C: Epoxy Dispensing System for Dowel Bars & Traffic Markers
Engineered for Industrial Construction Applications
In the high-stakes world of construction, the AST RMP 624 stands as the definitive two-part dispensing system for epoxy applications. Specifically engineered for industrial use, this system excels in placing dowel bars and securing traffic markers, offering unmatched performance, reliability, and efficiency.
Epoxy Dispensing: Precision at Scale
The AST RMP 624 is designed to meet the rigorous demands of construction professionals. Utilizing AST's RMP metering pumps, the system ensures precise mixing ratios—1:1, 2:1, or 4:1—for optimal epoxy application. Whether it's for dowel bar placement or traffic marker installation, this system delivers unparalleled accuracy.
High-Volume Throughput: Built for Speed
With a continuous flow rate of up to 0.8 gallons per minute and the capability for up to 20 cycles per minute, the AST RMP 624 is built for speed without compromising on quality. Its adjustable flow rate allows for project-specific calibration, making it an indispensable tool for large-scale, time-sensitive operations.
Operational Advantages
- Industrial-grade construction for long-term reliability
- Pneumatic controls ensure consistent, dependable operation
- Automatic dispense valve for enhanced efficiency
- High-capacity stainless steel tanks for extended use
- Capable of handling extreme fluid pressures and viscosities
- Backed by AST's comprehensive warranty
- Metered shots for adjustable and accurate dispensing
Specifications
|
MODEL |
PCH RMP-624, 824, 1024 |
DRIVE SYSTEM |
AST 6”-8”-10” Dia. x 6”-9” stroke |
|
MACHINE TYPE |
Fixed ratio/metering/dispensing Rod Metering Pumps with changeable ratio |
METERING PUMPS |
AST RMP rod pumps, positive displacement; meter mounted either horizontally or vertically |
|
CONTINUOUS OUTPUT |
Up to 1.0 gpm dependent on viscosity & temperature |
PUMP SIZES |
Up to 1-½” Dia. x 6” stroke; max 4” pump stroke plus 2” recharge |
|
CONTAINERS |
9 gallons each side, stainless steel, 16 gauge; gasket sealed with 3 clamps per side |
SHOT SIZE ADJUSTMENT |
|
|
|
0-100% of full stroke |
||
|
VISCOSITY RANGE |
Up to 500,000 cps |
MIXER |
Disposable, plastic, static |
|
ACCURACY |
Within 2%, shot to shot |
CONTROLS |
On/Off, pressure regulation |
|
SERVICES REQUIRED |
Clean, dry, compressed air at 90 psi; up to 10 cfm |
APPLICATORS |
AST hand held or extension; manual (automatic optional) |
|
CYCLE RATE |
Up to 30 cycles per minute |
DIMENSIONS |
36” W x 26” L x 33” H; 250 lbs. |
|
RATIO RANGE |
Standard fixed ratios from 1:1 to 4:1; other ratios available |
OPTIONS |
|
Common Compatible Materials
- Epoxy
- ATC Ultrabond 1300 or 1
- Dayton J 51
- FTC EAS-06
- Hilti HS 200
- Contact us to see if your material is compatible
