Infinity Bond Benchtop Basic Meter Mix System

The Infinity Bond Benchtop Bastic Meter Mix System is a small light duty meter mix and dispensing system. It is at its best when running short run production/lab batch parts larger than 5cc but not so large that the manual controls...

Infinity Bond Benchtop Pro Meter Mix System

The Infinity Bond Pro is the best choice for most potting, filter, and casting applications. The exceptions are when the parts are large and the required flow rate exceeds 3lb/minute (low viscosity). The Benchtop Pro is a straight-forward winner in the overly complex...

Infinity Bond Super Flow Meter Mix System

The Super Flow is designed for casting, potting, and laminating and excels at many applications including: coil impregnation, filter end-capping, vacuum casting, and potting. With an output of up to 1 gallon per minute (low viscosity), the Super Flow is the best choice when the...

Techcon TS50BP Basic Benchtop Meter Mix Dispensing System

The Techcon TS50BP is a simple to use and configure system for low to medium viscosity two part adhesive resins. It provides a low cost way to dispense two part materials for bonding, potting, encapsulating, sealing and more. Use this...

Techcon TS50FR Advanced Benchtop Meter Mix Dispensing System

The Techcon TS50FR benchtop meter mix dispensing system is a low cost way to mix and dispense two part adhesives. This system can be activated using a foot pedal or programmable logic controller making it perfect for manual or semi-automated...

Techcon TSM120FR Large Shot Size Benchtop Meter Mix Dispensing System

The Techcon TSM120FR is simple, low cost meter mix dispensing system for larger shot sizes (5-120cc). It offers the ability to dispense using a simple foot pedal or programmable logic control. This system excels for dispensing larger shot sizes of two...

Compact Drum, Tote or Reservoir Meter Mix Dispensing System

This high volume two part adhesive meter mix dispensing system offers all of the output and features of larger equipment in a compact size. Easily dispense two part adhesives from a 7 gallon reservoir, 50 gallon drum or larger adhesive...

Compact Perfect Flow High Volume Two Part Pump Dispensing System

The Compact Perfect Flow in the best option when there is a lot of work to do. Large parts and high-volume operation when production must be done over multiple shifts. The Compact Perfect Flow is at its best potting or...

Max Flow Super High Volume Two Part Pump Dispensing System

The Max Flow is the right machine when the flow requirements are large. With an output up to 5 gallons per minute - most large part casting, transformer potting or high flow resin supply jobs are within the scope of...

Manual Cartridge Gun for S-System 50ml Cartridges

$2,113.00 — 2 options available

Use this manual cartridge gun was created specifically for S-System cartridges. This cartridge is manufactured by Sulzer Mixpac but used by a wide range of manufacturers for dispensing two-part adhesives. 

Manual Cartridge Gun for Standard 200ml Two Part Cartridges

$260.00 — 3 options available

Use the Sulzer Mixpac DM 200 manual cartridge gun with most standard 200ml two part adhesive cartridges. It offers a lightweight, durable design that easily dispenses 1:1, 2:1, 4:1 or 10:1 ratio adhesive cartridges. 

Manual Cartridge Gun for Standard 400ml Two Part Cartridges

$295.00 — 3 options available

Use the Sulzer Mixpac DM 400 manual cartridge gun with most standard 400ml two part adhesive cartridges. It offers a lightweight, durable design that easily dispenses 1:1, 2:1, 4:1 or 10:1 ratio adhesive cartridges.