• Honle UV LED Spot 100 UV Curing System

Honle LED Spot 100 Large Surface Area UV Curing System

When to Use the Honle UV LED Spot 100 UV Curing System

The Honle UV LED Spot 100 is a UV curing system that can be used in manual, semi-automated and fully automated curing applications. It allows users to apply a specific wavelength of LED light to a larger surface area making it excellent for curing large parts. The Honle UV LED Spot 100 comes in 2 configurations that allow for higher or lower intensity and a wide range of wavelength options. 

SKU: HONLE UV LED-SPOT-100-HP-IC-365

More Information on the Honle LED Spot 100 UV Curing Flood Light System

The Honle LED Spot 100 IC / HP IC has been developed for all applications requiring a highly intensive UV irradiance over a large area. The LED assembly, as well as an electronic power control, guarantee high intensity and homogenous distribution of light. The recognition of LED-malfunction and a comprehensive monitoring function provide very high process stability. So, especially in fully automated production lines, repeatable results can be realized even in shortest cycle times.

The typical service life of a LED is longer than 20.000 hours***. The LED Spot 100 IC / HP IC can be switched on and off as often as necessary. It does not require a warm-up or cooling phase.

The emitted wavelengths are available in 365/385/395/405/ 460 nm +/- 10 nm. This allows to adapt the LED Spot to the existing application.

The square light-emitting aperture has a size of about 100 mm x 100 mm. Depending on the required intensity/homogeneity it can be increased considerably by changing the distance to the substrate. The optimized housing design means the devices are now stackable with only minimal gaps. An integrated fan provides adequate cooling even for continuous operation.

The new LED Spot 100 HP IC is the most powerful model. At 405 nm wavelength 2.200 mW / cm² guarantee reliable and fast curing. For manufacturing processes which require lower intensities the LED Spot 100 IC offers at 405 nm up to 1.100 mW/cm². The power supply and control of the LED Spot 100 IC / HP IC can be done either by the optionally available LED power drive IC or by an external power supply and PLC signals.

Honle LED Spot 100 Specifications

Light-emitting aperture

in mm:

 

about 100 x 100

Dimensions in mm:

L x W x D

205 x 108 x 108

Wavelengths in nm

typical intensity in mW/cm² LED Spot 100 HP IC

LED Spot 100 IC

365 385 395 405 460

 

1200* 2200* 2200* 2200* 3000**

600* 1100* 1100* 1100* 1500**

Cooling

Air cooled

Special Features

  • Integrated controller (IC)
  • Driving and monitoring of the LED segment
  • Monitoring of the LED segment regarding short-circuit, interruption and excess temperature
  • Recording of the operating hours
  • Analogue dimming of the segments via a 0-10 V-signal
  • Digital PLC interface (LED enable, LED on, LED error)
  • Bus control of all modules via RS485 or optional LED power drive IC

Honle LED Spot 100 Brochures and Data Sheets

Product Data Sheet